Here they are - BIBS bottles which definitely were worth waiting! Extremely sweet, practical, with our favorite BIBS nipples, and last but not least absolutely harmless, thanks to the materials used tproducing them. Undoubtedly the best product you can easily offer to your baby!
Feature:
- Made of *borosilicate glass
- Temperature- and thermal shock-resistant, and durable
- Does not emit microplastics into the milk
- Chemical and acid degradation resistant
- Does not change shape over time, discolor or fade
- Withstand dishwasher cleaning
* Borosilicate glass contains mainly two chemical elements - about 12-13% boron trioxide and 80% silicon dioxide. They are harmless to health and environment, but give the glass special properties such as Heat resistance, Chemical resistance (the material will not interact with the liquid placed in the bottle), Durability, Lightness (has a lower density (2.23 g / cm3), which makes it lighter than usual), It is more useful for your health, Protects nature, Preserves the taste better, etc.
Your baby bottle must be cleaned and sanitized before your baby uses it. Part of good baby bottle hygiene is carefully cleaning the bottle before each use. The younger the baby, the more important it is to protect it from bacteria and to maintain good hygiene.
Before first use
Before first use, disassemble and clean the product by placing all components in boiling water for 5 min. to ensure hygiene.
Subsequently cleaning
The latex nipple must be cleaned and sterilized before each use by scalding.
- Pour it with boiling water and let it soak in the water for approx. 5 min.
- Pick it up and let it dry on a clean towel.
DO NOT use microwave sterilizing or cleaning products or even dishwasher as it will break down the natural rubber latex. Renew the nipple after using it for 4-6 weeks for safety and hygiene reasons. Please do not leave the nipple in direct sun.
Further, always inspect the nipple before each use by pulling the nipple in all directions inspecting it carefully before use, and replacing the nipple at the first sign of damage or weakness.
The milk lock, screw cap, ring, and glass bottle can all be cleaned and sterilized by:
- Washing with hot water and soap or washing in the dishwasher.
- Pour them with boiling water, to make sure all soap residue is gone.
- Let all the parts dry completely before re-assembly.
The baby bottle meets the following standards on the European market:
EN 1400 + A2
EN 14350: 2020
EN 71-3-2019
DIN EN 12868 2017-04
DIN EN 1186 2002-07
DIN CEN / TS 13130-23 2005-05
DIN EN ISO 11885 2009-09
In addition, it also meets the following market standards in North America:
16 CFR 1500
CPSIA Section 101 + 108
California Prop. 65
FDA CFR 21 177.2600
Contents:
1 piece. glass bottle 225 ml.